Industrial automation is moving from traditional production line control into a new phase of intelligence and high reliability. Inverters, servo drives, PLC I/O modules, industrial robots, industrial power supplies, and the generation side of new energy all depend on basic semiconductors. With the 12-inch wafer platform as its manufacturing foundation and three product lines - MOSFETs, logic ICs, and bipolar discrete devices - Nexperia China provides a full-chain solution from signal to power for industrial automation.
Nexperia ranks No. 1 globally in small-signal diodes and transistors, ESD protection devices, and small-signal MOSFETs, and among the global top three in automotive power MOSFETs and logic devices. Nexperia China's proprietary 12-inch SGT T2X automotive MOSFETs and high-speed HCS logic products are both industry-leading, filling the gap in 12-inch automotive-grade high-voltage MOSFETs.
The MOSFET products meet demanding industrial reliability requirements with high current handling, excellent thermal performance, and a wide voltage range. The T2X platform delivers across-the-board improvements in conduction loss, thermal performance, surge withstand capability, and EMI characteristics, bringing higher power density and lower system losses to industrial motor drive systems. The 100V MOSFETs handle safe currents above 460 A, suitable for two- and three-wheeled electric vehicles, DC-DC converters, and high-current industrial modules. The products entering mass production this time have completed a full set of standardized reliability verification, covering both automotive and industrial grades.
According to industry information, the effective chip output of a single 12-inch wafer is about 5.7 times that of a 5-inch wafer, about 4 times that of a 6-inch wafer, and about 2.2 to 2.4 times that of an 8-inch wafer. In terms of per-chip cost, this means a reduction of about 70% compared with 5-inch, about 60% compared with 6-inch, and about 50% compared with 8-inch.
Automotive and industrial are the two largest application markets for power discrete devices, together accounting for more than 60% of demand, with industrial automation demand especially strong. On the manufacturing side, critical dimension control on 12-inch lines is far more precise, electrical parameter consistency has improved across the board, full automation has cut manual operations by more than 90%, wafer defect density has dropped significantly, and effective yields for mature products have risen substantially - providing consistency assurance for large-scale industrial applications.
On development efficiency: Nexperia's product development used to take 24 to 36 months; now it takes 6 to 12 months. The localization ratio of some core devices has risen from under 20% to nearly 100%.
Nexperia China is integrating deeply into the domestic industrial chain ecosystem. The August 23 global launch event may well mark the point at which Nexperia China goes all in on the industrial track.
About Nexperia Semiconductors (China) Ltd.：
As a frontrunner in the development and production of basic semiconductor devices, Nexperia Semiconductors (China) Ltd. (Anshi China) offers devices that are widely used in various applications such as automotive, industrial, mobile, and consumer electronics, supporting almost all basic functions of electronic design worldwide. Nexperia Semiconductors (China) Ltd. (Anshi China) provides products and services to customers globally, with these products becoming industry benchmarks in terms of efficiency (such as process, size, power, and performance) and gaining widespread recognition. Nexperia Semiconductors (China) Ltd. (Anshi China) boasts a rich IP product portfolio and a continuously expanding product range, and has obtained certifications under the IATF16949, ISO9001, ISO14001, and ISO45001 standards, fully demonstrating the company's firm commitment to innovation, efficiency, sustainable development, and meeting stringent industry requirements.
- 14 views
